Menu
| Vertical graded loading | 50, 100, 200, 300, 400kpa |
|---|---|
| Sample area | 30cm², height 200mm |
| Maximum horizontal load | 1.2KN |
| Leverage ratio | 1:20 |
| Size | mm: 830*530*1260 |
| Weight | 85kg |
This instrument is mainly used to determine the shear strength of the graph. Four soil samples are usually used. Under different vertical pressures (400Kpa, 300Kpa, 200Kpa, 100Kpa, 50Kpa optional), apply horizontal force to shear to obtain the shear stress at failure, and then determine the shear strength parameters and internal friction of the soil according to Coulomb’s law Angle and cohesion. (Executive standard:T0140-1993/T0141-1993/T0142-1993/0143-1993/T0176-2007 in JTG E40-2007).
Features
The transmission mode is changed from the original DC servo motor to a compact stepper motor, the motor power supply is changed from the original 220V to 24V safe voltage, and the force point of the lever is improved from the original knife-edge type to the bearing type. This instrument is safer, more sensitive, Small, more applicable, and lower noise. Therefore, the use of this instrument lays a good foundation for laboratory automation.
Technical Parameters
Vertical graded loading: 50, 100, 200, 300, 400kpa
Sample area: 30cm², height 200mm
Maximum horizontal load: 1.2KN
Leverage ratio: 1:20
Size: mm: 830*530*1260
Weight: 85kg
Packing List
| 1.53kg Weight | 3pcs |
| 0.765kg Weight | 1pc |
| hanging plate（0.765kg） | 1pc |
| Ring knife（φ61.8） | 1pc |
| Steel ball | 14pc |
| User Manual | 1pc |
| Measuring force ring verification diagram | 1pc |
| Container tryout（30cm²） | 1 set |
| Force ring | 1 set |
| Table clamp column | 1pc |
| Table clamp column | 1pc |
| φ61.8Permeable stone | 2pcs |
| Carpenter’s square | 1pc |
China leading construction material testing equipment manufacturer.
We will contact you within 1 working day, please pay attention to the email with the suffix “@gtj-test.com”.